From DEMONS RUN

Main: AvroLancaster

Avro Lancaster Bomber Rc Build.


The mission:

Here i will be doccumenting my (attempted) scratch build of an Avro Lancaster Bomber.

The Plans:

I will be using the below plans for a control line Lancaster that I got off of ebay, moddifying them slightly for RC.


Disclamer: You may not download these plans unless you own the origonal plans!

Materials:

The below units are aprox as they have been converted from imperial to metric!

6 lengths 2 x 100 x 1000mm Med soft sheet Balsa 3 lengths 3 x 7.5 x 1000mm Med soft sheet Balsa 1 lengths 5 x 7.5 x 1000mm Med soft sheet Balsa 2 lengths 5 x 100 x 1000mm Med soft sheet Balsa 1 lengths 5 x 7.5 x 1000mm Med hard sheet Balsa 4 lengths 6 x 100 x 1000mm Med soft sheet Balsa 2 lengths 6 x 6 x 1000mm Med strip Balsa 2 lengths 6 x 8 x 1000mm Med strip Balsa 1 length 9.5 x 7.5 x 1000mm Med soft sheet Balsa 2 lengths 12 x 7.5 x 1000mm Med soft sheet Balsa 2 lengths 6 x 19 x 1000mm /| (right angle triangle) section T.E. 1 pce 0.7 x 38 x 7.5mm plywood 1 pce 3 x 150 x 150mm plywood 1 pce 5 x 50 x 50mm plywood 1 pce 6 x 250 x 250mm plywood 1 length 25 x 7.5 x 500mm soft block balsa 2 lengths 14 swg x 1000m piano wire

Retrieved from http://demonsrun.co.uk/index.php/Main/AvroLancaster
Page last modified on February 08, 2015, at 11:40 AM